Meltio Engine Robot is a metal 3D printer that can print large size (1m or more) parts and products and complex shapes without support, and is ideal for repair and cladding.

It can be mounted on existing robot arms (Fanuc, Yaskawa Electric, ABB, KUKA, etc.) and is suitable for a wide range of applications such as heavy industry, construction, and aerospace.

The X3 has about three times the molding area of ​​the predecessor desktop series (Mark Two / Onyx Pro / Onyx One), enabling large-scale molding and mass production. Onyx™ is twice as strong as standard plastic parts and 20% stronger than ABS. In addition, by installing a new laser sensor, the height of the head can be adjusted automatically.

The X7 has approximately three times the molding area of ​​the predecessor desktop series (Mark Two / Onyx Pro / Onyx One), enabling large-scale molding and mass production.

A new laser sensor enables automatic head height adjustment, and the laser measurement function enables highly accurate modeling.

By using Onyx™ and Nylon on the outside to maintain a smooth surface quality, and by laminating continuous fibers such as carbon fiber on the inside, it is possible to create parts with high strength and durability.

Affordable compared to traditional metal 3D printers, the Meltio M450 comes ready-to-go and easy for anyone to use.

It is compatible with various metal materials such as stainless steel and titanium, including commercially available materials, and is capable of molding small to medium-sized parts and products that are stronger than cast products, making it ideal for bimetal product research.

The PostPro SF100 is an industrial surface treatment system that processes 3D printed parts to give them the look and feel of injection molded parts.

The WASP 4070 HDP is an eco-friendly 3D printer that can 3D print directly from pellets. Compatible with a variety of materials, from general-purpose plastics to recycled materials and marine debris. By enabling the retraction to pull back the material from the nozzle, it prevents the material from flowing out and realizes stable modeling. It can be used in a wide range of fields such as manufacturing, research, material development, educational institutions, art, furniture, etc. It is also ideal for recycling and SDGs initiatives.

The Mark Two is compatible with a variety of composite materials, including Onyx™, Nylon, and carbon fiber, allowing you to build parts as strong as aluminum on your benchtop. It can be used not only for prototyping, but also for molding jigs and final parts, which can be expected to shorten lead times and reduce costs. It is recommended for those who are new to carbon 3D printers because it has a compact body weight of 16 kg and the introduction cost can be greatly reduced.

The Composer 450 can heat up to 450°C with its built-in heater. This makes it possible to filamentize high-quality plastics and composites. It is suitable for various industries such as chemical, consumer and education, and is suitable for material research. We will play an active role in research, development, recycling, and initiatives for SDGs.

The Lisa X is supportless and prints shapes exactly as designed at high speed and with high quality. Compared to its predecessor, the Lisa Pro, the molding speed has increased from 3mm to 14mm per hour, and the maximum molding size is the largest among other SLS 3D printers. It takes only 45 minutes from setup to completion of post-processing, so we can expect a reduction in lead time. It is mainly used for prototyping, small-scale production, research, education, etc., and has already been used in many domestic and overseas universities and research institutes.

The M350 is a very easy-to-use 3D printer because it is a desktop model and is easy to operate and maintain. The material can be freely selected, making it ideal for material development and research. It is also compatible with our filament manufacturing machine "3devo".

Pollux is a compact surface treatment equipment specialized for air blast polishing. We handle a wide range of applications, from final polishing of molded products to removal of layered steps and visualization.

The WASP 3MT HDP enables 3D printing directly from pellets, allowing large size parts and products up to 1m in diameter and 1m in height. Compatible with a variety of materials, from general-purpose plastics to recycled materials and marine debris. By enabling the retraction to pull back the material from the nozzle, it prevents the material from flowing out and realizes stable modeling. It can be used in a wide range of fields such as manufacturing, research, material development, educational institutions, art, furniture, etc. It is also ideal for recycling and SDGs initiatives.