-
Standard
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 20,000-29,000円
The Standard 3D printer resin material is the best material for high-resolution, high-speed prototyping. Developed for demanding applications, it provides excellent surface finish even on complex parts. It is recommended when you want to make prototypes at high speed or for development.
-
Durable
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 33,000円
A tough and durable material for the Formlabs Form 3. With similar physical properties to polypropylene (PP) plastic and high density polyethylene (HDPE), this material is suitable for applications requiring high elongation, deformation or impact resistance. * Do not soak parts printed with Durable Resin in IPA for more than 20 minutes total. Any further exposure to alcohol may degrade the quality of the part.
-
Castable Wax
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 48,000円
Materials for the Formlabs "Form 3". With 20% wax content, this material captures intricate details and provides smooth surfaces and high strength without post-curing. A casting material developed to burn out without producing ash. Suitable for direct investment casting and custom prototyping. * When cleaning parts printed with Castable Wax Resin, remove liquid material as quickly as possible. Also, let the IPA evaporate completely before proceeding to harden or cast parts. Use compressed air to completely blow the IPA off the part, especially no IPA in internal channels or cavities.
-
Model
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 24,000円
It is a material that realizes high-precision and high-definition modeling. Faster than Standar material and provides a smoother surface finish than Draft. It is easy to polish and paint, and is suitable for applications where you want to make the model look beautiful.
-
High Temp
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 32,000円
Formlabs Form 3 material. The heat deflection temperature (HDT) is 238°C for V2 (FLHTAM02) and 289°C for V1 (FLHTAM01) at a load of 0.45 MPa. It is designed as a material that can be used statically in high temperature environments such as thermoforming, vulcanization and encapsulation of electronic components. * When rinsing parts printed with High Temp Resin in isopropyl alcohol (IPA), stop within 10 minutes. Any longer and the part will absorb the solvent.
-
Gray Pro
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 33,000円
It is designed as a material suitable for applications that require high elongation and energy balance ratio. Use it when you want to produce prototypes that can be bent, stretched, compressed, or repeatedly used without tearing. * Resin Tank V2 is required when printing with Elastic Resin on Form 3. **Do not soak parts printed with Elastic 50A Resin in IPA for more than 20 minutes total. Any further exposure to alcohol may degrade the quality of the part.
-
Rigid
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 41,000 / 48,000円
Formlabs Form 3 material. A glass-fiber reinforced material, parts built with it are extremely hard, have a glossy surface, and resist deformation over time. Suitable for printing thin objects such as thin walls. Not suitable for printing parts that need to be bent. * Resin Tank V2 is required when printing with Elastic Resin on Form 3. **Always use different wash buckets.
-
Elastic 50A
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 28,000円
It is designed as a material suitable for applications that require high elongation and energy balance ratio. Use it when you want to produce prototypes that can be bent, stretched, compressed, or repeatedly used without tearing. * Resin Tank V2 is required when printing with Elastic Resin on Form 3. **Do not soak parts printed with Elastic 50A Resin in IPA for more than 20 minutes total. Any further exposure to alcohol may degrade the quality of the part.
-
Flexible 80A
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 32,000円
Flexible 80A, a 3D printer resin material, is an elastic material for Formlabs "Form 3". Developed as a material that imitates rubber with a durometer hardness of 80A, it has excellent impact resistance and compressibility, and is suitable as a material when you want to obtain a soft touch based on ergonomics.
-
color pigments
メーカー : Formlabs
材料の形状 : resin (liquid)
価格 : 3,000円
Achieve colorful prints without the need for finishing or painting. Color Base is formulated on the assumption that it will be mixed with an appropriate amount of Color Pigment. To successfully print with Color Base, it must be mixed with one of the Color Pigments. Also, Color Pigments are not designed for use with resins other than Color Base.